PRINCIPLE
Principle
Avanced testing
Improving product's technical/process indexes,like static/dynamic accuracy,thermal stability etc. by combining advanced test and simulation engineering calculation system.
ADVANTAGE
Technical Advantages
-
Advanced testing freature 1
Closed loop in simulation and test, simulation instead of test;
-
Advanced testing freature 2
Data acquisition and calibration tools to solve engineering problems of precision and structural deformation;
-
Advanced testing freature 3
Reduce the number of tests, accelerate the product development cycle, and simulation completely replace the test in the product development process in the end.
APPLICATION
Application
-
Photovoltaic -
New display -
EV Power
PRODUCTS
Products
Products relative to advanced testing
-
EV Battery
-
Electronics
-
Photovoltaic
-
Smart Home
-
Life Sciences
-
Modern Building
-
Transports
-
Sheet-metal Working
-
-
View Products
High-Speed Prismatic Cell Winding Machine-
Automatic correction of tab alignment enabled by winding needle with variable diameters
-
Four grades of electrode position correction, forming closed loop control with CCD
-
High performance moving controller and advanced technology from Omron
-
Track notching and cross-cutting for incoming electrode
-
-
View Products
Cylindrical Notching & Winding Integrated Machine-
Tab notching position control by correction unit and CCD closed loop inspection
-
Multiple dust removal system with high efficiency
-
Internal calculating and information tracing for NG rejection
-
Online monitoring and dynamic adjustment of tab notching dimensions and tab winding alignment
-
-
View Products
Auto Assembly Line of Top Cover-
Systemized dust and particle prevention treatment.
-
Equipped with self-inspection and foolproof functions for incoming materials.
-
MES system full closed-loop production processing
-
Less spatter, good weld effect and high stability
-
-
View Products
High-Speed Coating Machine (Double-Deck & Multi-Lane )-
Auto unwinding and rewinding (turret)
-
Repeated positioning accuracy of module head: 1µm.
-
Double- deck drying oven in an arc-shaped layout enables a smooth electrode running
-
High flexibility enabled by driven guide rollers with thin oil
-
-
View Products
Calendering & Slitting Integrated Machine-
Dual-position rewinding with sliding air shaft
-
Wrinkle removal by stretching unit
-
Calibrate the rollers by stretching bending cylinder
-
Adjust roller distance by mechanical operation and servo cylinder
-
-
View Products
Full-Auto Prismatic Cell Assembly Line-
Highly automatic, complete the assembly processes without human intervention
-
Modular design, short changeover time, few parts, low costs
-
Automatic process control with traceable information for the whole processes, which can dock all types of MES systems
-
Digital twin 3D visualization technology, equipment state visualization, intelligent information interaction, improve user experience.
-
-
-
-
View Products
Auto Assembly Line of Top Cover
-
Systemized dust and particle prevention treatment.
-
Equipped with self-inspection and foolproof functions for incoming materials.
-
MES system full closed-loop production processing
-
Less spatter, good weld effect and high stability
-
-
View Products
Micro LED Laser Mass Transfer Machine-
This machine has automatic splicing and re-pitch function, which can transfer one or three color Micro led chip arrays of any size and pitch to target substrate.
-
Simultaneously compatible with mass transfer and repair processes, the yield of mass transfer is ≥99.99%, and the yield after repair is ≥99.99%.
-
The maximum size of the laser transfer product can reach 12.7inch, and the laser transfer accuracy is ≤±1.5μm, the laser transfer angle is ≤±1°.
-
Automatic transfer of RGB chips.
-
-
View Products
High Precision Laser Automatic Wafer Cutting Equipment-
Realize high-precision cutting of wafer brittle materials without chipping and cracks
-
Hymson company self-developed cutting head to achieve cutting of glass of different thicknesses
-
Compatible with different types and sizes of products
-
-
View Products
Laser Welding Repair Equipment-
Coaxial visual positioning system, high-precision positioning chip position, real-time monitoring of product status and effect in the welding repair process
-
Real-time monitoring of welding temperature, closed-loop temperature control, to ensure welding quality
-
Optional AOI system to instantly confirm welding success rate
-
-
View Products
Fully Automatic Chip Removal Equipment-
Coaxial visual positioning system, high-precision positioning chip position
-
Accurate detection of welding pad height trims residual tin paste on the welding pad without damaging the welding pad
-
Flexibly select laser or mechanically remove chips
-
-
View Products
Mini LED/Micro LED Fully Automatic Laser Repair、 Removal and Trimming Equipment-
Used for the removal of rubber material after sealing of Mini LED module and the trimming of welding pads after decrystallization in each process section, which is compatible with products of different thicknesses and sizes
-
Matching micron-level light spot removes the chip encapsulant of micro LED as small as 5μm without damaging adjacent chips and welding pads
-
-
-
-
View Products
Full-Auto Prismatic Cell Assembly Line
-
Highly automatic, complete the assembly processes without human intervention
-
Modular design, short changeover time, few parts, low costs
-
Automatic process control with traceable information for the whole processes, which can dock all types of MES systems
-
Digital twin 3D visualization technology, equipment state visualization, intelligent information interaction, improve user experience.
-
-
View Products
Solar Inverter Automatic Assembly Line-
High production efficiency, double shift saving about 40 people.
-
Fast speed and strong stability, improve the product follow-up test link pass rate.
-
Standardized module design, can be adjusted at any time, expansion station or upgrade.
-
Production data is automatically saved and connected to the server.
-
-
View Products
Photovoltaic Glass Punch-
Marble precision platform, stable bearing, corrosion resistance.
-
The machining platform is driven by linear motor and optical ruler in closed loop, which is easy to maintain and has high precision.
-
Infrared picosecond laser, small processing heat affected area, especially suitable for fine cutting.
-
Imported vacuum generator is adopted to ensure the stability of adsorption and positioning of products.
-
-
View Products
Glass Laser Drilling Machine-
Marble precision platform, stable bearing, corrosion resistance.
-
The machining platform is driven by linear motor and optical ruler in closed loop, which is easy to maintain and has high precision.
-
Special pulse width laser, processing thermal effect is small, especially suitable for fast precision drilling.
-
Adopted vacuum generator is adopted to ensure the stability of adsorption and positioning of products.
-
-
View Products
Transparent Brittle Material Precision Laser Cutting Machine-
Marble precision platform, stable bearing, corrosion resistance.
-
The machining platform is driven by linear motor and optical ruler in closed loop, which is easy to maintain and has high precision.
-
Infrared picosecond laser, small processing heat affected area, especially suitable for fine cutting.
-
Imported vacuum generator is adopted. Ensure the stability of product adsorption positioning.
-
-
View Products
Automation Nondestructive Laser Scribing Equipment-
The machine adopts industrial PC control, modular flexible programming design;
-
Compatible with solar cell from 156mm to 230mm
-
Good stability in processing, small heat-effected zone, less dust,High yield
-
High conversion
-
-
-
-
View Products
Micro LED Laser Mass Transfer Machine
-
This machine has automatic splicing and re-pitch function, which can transfer one or three color Micro led chip arrays of any size and pitch to target substrate.
-
Simultaneously compatible with mass transfer and repair processes, the yield of mass transfer is ≥99.99%, and the yield after repair is ≥99.99%.
-
The maximum size of the laser transfer product can reach 12.7inch, and the laser transfer accuracy is ≤±1.5μm, the laser transfer angle is ≤±1°.
-
Automatic transfer of RGB chips.
-
-
View Products
High Precision Laser Automatic Wafer Cutting Equipment
-
Realize high-precision cutting of wafer brittle materials without chipping and cracks
-
Hymson company self-developed cutting head to achieve cutting of glass of different thicknesses
-
Compatible with different types and sizes of products
-
-
View Products
Laser Welding Repair Equipment
-
Coaxial visual positioning system, high-precision positioning chip position, real-time monitoring of product status and effect in the welding repair process
-
Real-time monitoring of welding temperature, closed-loop temperature control, to ensure welding quality
-
Optional AOI system to instantly confirm welding success rate
-
-
View Products
Fully Automatic Chip Removal Equipment
-
Coaxial visual positioning system, high-precision positioning chip position
-
Accurate detection of welding pad height trims residual tin paste on the welding pad without damaging the welding pad
-
Flexibly select laser or mechanically remove chips
-
-
View Products
Mini LED/Micro LED Fully Automatic Laser Repair、 Removal and Trimming Equipment
-
Used for the removal of rubber material after sealing of Mini LED module and the trimming of welding pads after decrystallization in each process section, which is compatible with products of different thicknesses and sizes
-
Matching micron-level light spot removes the chip encapsulant of micro LED as small as 5μm without damaging adjacent chips and welding pads
-
-
View Products
Micro LED/Mini LED Laser Mass Welding Equipment-
High-efficiency LED chip massive welding, yield can reach more than 99.99%
-
High-speed welding in large area, leading the industry production efficiency
-
Closed-loop temperature control to ensure bonding temperature stability
-
-
-
-
-
View Products
Full-Auto Prismatic Cell Assembly Line
-
Highly automatic, complete the assembly processes without human intervention
-
Modular design, short changeover time, few parts, low costs
-
Automatic process control with traceable information for the whole processes, which can dock all types of MES systems
-
Digital twin 3D visualization technology, equipment state visualization, intelligent information interaction, improve user experience.
-
-
View Products
Full-Auto Prismatic Cell Baking Line-
Highly automatic, complete the assembly processes without human intervention
-
High compatibility, adapt to various series of products
-
Modular design, short changeover time, few parts, low costs
-
High assembly precision, dual positioning by visual and mechanical ways to improve positioning accuracy
-
-
View Products
Micro LED Laser Mass Transfer Machine
-
This machine has automatic splicing and re-pitch function, which can transfer one or three color Micro led chip arrays of any size and pitch to target substrate.
-
Simultaneously compatible with mass transfer and repair processes, the yield of mass transfer is ≥99.99%, and the yield after repair is ≥99.99%.
-
The maximum size of the laser transfer product can reach 12.7inch, and the laser transfer accuracy is ≤±1.5μm, the laser transfer angle is ≤±1°.
-
Automatic transfer of RGB chips.
-
-
View Products
High Precision Laser Automatic Wafer Cutting Equipment
-
Realize high-precision cutting of wafer brittle materials without chipping and cracks
-
Hymson company self-developed cutting head to achieve cutting of glass of different thicknesses
-
Compatible with different types and sizes of products
-
-
View Products
Laser Welding Repair Equipment
-
Coaxial visual positioning system, high-precision positioning chip position, real-time monitoring of product status and effect in the welding repair process
-
Real-time monitoring of welding temperature, closed-loop temperature control, to ensure welding quality
-
Optional AOI system to instantly confirm welding success rate
-
-
View Products
Fully Automatic Chip Removal Equipment
-
Coaxial visual positioning system, high-precision positioning chip position
-
Accurate detection of welding pad height trims residual tin paste on the welding pad without damaging the welding pad
-
Flexibly select laser or mechanically remove chips
-
-
-
-
View Products
Micro LED Laser Mass Transfer Machine
-
This machine has automatic splicing and re-pitch function, which can transfer one or three color Micro led chip arrays of any size and pitch to target substrate.
-
Simultaneously compatible with mass transfer and repair processes, the yield of mass transfer is ≥99.99%, and the yield after repair is ≥99.99%.
-
The maximum size of the laser transfer product can reach 12.7inch, and the laser transfer accuracy is ≤±1.5μm, the laser transfer angle is ≤±1°.
-
Automatic transfer of RGB chips.
-
-
View Products
High Precision Laser Automatic Wafer Cutting Equipment
-
Realize high-precision cutting of wafer brittle materials without chipping and cracks
-
Hymson company self-developed cutting head to achieve cutting of glass of different thicknesses
-
Compatible with different types and sizes of products
-
-
View Products
Laser Welding Repair Equipment
-
Coaxial visual positioning system, high-precision positioning chip position, real-time monitoring of product status and effect in the welding repair process
-
Real-time monitoring of welding temperature, closed-loop temperature control, to ensure welding quality
-
Optional AOI system to instantly confirm welding success rate
-
-
View Products
Fully Automatic Chip Removal Equipment
-
Coaxial visual positioning system, high-precision positioning chip position
-
Accurate detection of welding pad height trims residual tin paste on the welding pad without damaging the welding pad
-
Flexibly select laser or mechanically remove chips
-
-
View Products
Mini LED/Micro LED Fully Automatic Laser Repair、 Removal and Trimming Equipment
-
Used for the removal of rubber material after sealing of Mini LED module and the trimming of welding pads after decrystallization in each process section, which is compatible with products of different thicknesses and sizes
-
Matching micron-level light spot removes the chip encapsulant of micro LED as small as 5μm without damaging adjacent chips and welding pads
-
-
View Products
Micro LED/Mini LED Laser Mass Welding Equipment
-
High-efficiency LED chip massive welding, yield can reach more than 99.99%
-
High-speed welding in large area, leading the industry production efficiency
-
Closed-loop temperature control to ensure bonding temperature stability
-
-
-
-
View Products
Handheld Laser Welding Machine-
Green and economical friendly, less welding fumes, effectively improve the production environment and protect the physical and mental health.
-
Simple operation to get started quickly, convenient layout, flexible application, fast application for small batch and small space.
-
High quality and stable welding, fast welding speed, concentrated energy, large depth, small deformation, beautiful weld seam, no secondary grinding.
-
-
View Products
Automatic Loading System for Pipe Cutting-
Professional automatic loading and unloading of various types of pipes such as square tubes, circular tubes, rectangular tubes and profiles such as I-beams and groove steel.
-
Fully automatic loading and unloading system can effectively improve production safety without increasing manual labor, reducing personnel work intensity and labor cost.
-
The automatic loading mechanism adopts independent control system unit, which can work independently and synchronously, greatly improve the production efficiency, with simple and clear interface, convenient and quick operation.
-
Automatic continuous loading, automatic continuous feeding, intelligent follow-up discharging, automatic finished product conveying, ultra-economical to complete the production work of large quantities of different specifications of tubes all day, saving material and labor costs and improving efficiency benefits.
-
-
View Products
Automatic Loading and Unloading System for Sheet Cutting-
Flexible Manufacturing System is an effective solution to reduce production cost and improve production efficiency. Using this intelligent automation system will gain a better advantage in the market competition.
-
Automatic loading and unloading will reduce 35% material loading and unloading time compared to a single operator, and the automatic system can be continuous used in a long time, with a variety of materials and thicknesses that can be discharged and finished according to production requirements automatically.
-
The automatic system completes each production process in an orderly manner according to the settings, effectively maintaining consistency. On the other hand, in the case of manual operation, the time between each work cycle varies according to the human status.
-
A factory that relies on manual labor to load and unload materials would require additional machines in order to increase production, as well as additional operators, whereas a factory with an automatic system would only require additional machines, no additional labor.
-
-
Inquiry
Inquiry
Click to inquiry
Customer service
Customer Service
Contact us