Laser—— Laser Cutting

Laser-Laser Cutting

PRONCIPLE

Principle

Principle of laser cutting

Laser cutting is to use high-power density laser beam to scan the material surface, melt or vaporize the material in a very short time, melt or vaporize the material, formed narrow seam (0.15mm)and then blow the melted or vaporized material away from the incision with high-pressure gas, so as to achieve the purpose of cutting the material.

ADVANTAGE

Technical Advantages

Tab laser notching
Laser notching
Laser slitting
Carbon brazing sheet cutting
Stainless steel sheet micropores
Lightning cutting
Pipe bevel cutting

Tab laser notching
- The leading chase-cutting technology of tabs can realize flexible control with variable power and frequency, reducing burr, HAZ, foil exposure and other quality problems.
Laser notching
- The original technology replaces the traditional die cutting and controls the laser cutting route by pre-setting process parameters, achieving higher accuracy, consistency and battery quality.
Laser slitting
- The original design integrates slitting with tab notching, bringing 46% higher unit output and 33% lower equipment maintenance cost.
Carbon brazing sheet cutting
- 0.12-0.16 mm carbon fiber sheet cutting, cutting accuracy increased from 0.05 to 0.02 mm ;
- After processing, there is no lattice deformation, no burr, no wire stripping and no scratch on the glue surface.
Stainless steel sheet micropores
- Leading technology,laser welding and cutting integration.
- Connect 0.3 mm thin-walled large aluminum shell, 0.1 mm thin-walled large steel shell and cover plate, and the quality of welding / cutting is stable.
Lightning cutting
- Reduce the formation of burrs and slag adhesion in processed products.
- Improve the speed of the laser reaching the cutting plate. When using 6KW machine to process 5mm stainless steel plate, the speed is 6m/min higher than normal cutting, and the overall processing efficiency can be increased 67%.
- Lower Cutting gas consumption, Compared with normal cutting, when using 6KW machine to cut 6mm stainless steel, less cutting gas is used, reduce up to 54% energy consumption.
Pipe bevel cutting
- Accurate bevel angle, high cutting quality, smooth and flat cross section, realize seamless splicing of pipe workpieces,better meet the medium-thick pipes bevel welding quality requirements of bevel welding of medium-thick pipes.
- Achieve continuous cutting, and the quality of batch processing is stable. The workpiece does not need a lot of manual grinding, which effectively reduces labor costs and time investment.