Laser—— Laser Cutting

Laser-Laser Cutting


Principle of laser cutting

Laser cutting is to use high-power density laser beam to scan the material surface, melt or vaporize the material in a very short time, melt or vaporize the material, formed narrow seam (0.15mm)and then blow the melted or vaporized material away from the incision with high-pressure gas, so as to achieve the purpose of cutting the material.


Technical Advantages

  • Tab laser notching
  • Laser notching
  • Laser slitting
  • Carbon brazing sheet cutting
  • Stainless steel sheet micropores
  • Lightning cutting
  • Pipe bevel cutting
  • 148.jpg
    Tab laser notching
    • The leading chase-cutting technology of tabs can realize flexible control with variable power and frequency, reducing burr, HAZ, foil exposure and other quality problems.
  • 149.jpg
    Laser notching
    • The original technology replaces the traditional die cutting and controls the laser cutting route by pre-setting process parameters, achieving higher accuracy, consistency and battery quality.
  • 150.jpg
    Laser slitting
    • The original design integrates slitting with tab notching, bringing 46% higher unit output and 33% lower equipment maintenance cost.
  • 151.jpg
    Carbon brazing sheet cutting
    • 0.12-0.16 mm carbon fiber sheet cutting, cutting accuracy increased from 0.05 to 0.02 mm ;
    • After processing, there is no lattice deformation, no burr, no wire stripping and no scratch on the glue surface.
  • 375.jpg
    Stainless steel sheet micropores
    • Leading technology,laser welding and cutting integration.
    • Connect 0.3 mm thin-walled large aluminum shell, 0.1 mm thin-walled large steel shell and cover plate, and the quality of welding / cutting is stable.
  • 153.jpg
    Lightning cutting
    • Reduce the formation of burrs and slag adhesion in processed products.
    • Improve the speed of the laser reaching the cutting plate. When using 6KW machine to process 5mm stainless steel plate, the speed is 6m/min higher than normal cutting, and the overall processing efficiency can be increased 67%.
    • Lower Cutting gas consumption, Compared with normal cutting, when using 6KW machine to cut 6mm stainless steel, less cutting gas is used, reduce up to 54% energy consumption.
  • 154.jpg
    Pipe bevel cutting
    • Accurate bevel angle, high cutting quality, smooth and flat cross section, realize seamless splicing of pipe workpieces,better meet the medium-thick pipes bevel welding quality requirements of bevel welding of medium-thick pipes.
    • Achieve continuous cutting, and the quality of batch processing is stable. The workpiece does not need a lot of manual grinding, which effectively reduces labor costs and time investment.


  • jichujishuwulifangzhenjishuyingyong1-689.jpg
  • jishuyingyongguangfu-703.jpg
  • jichujishuwulifangzhenjishuyingyongxinxingxianshi-884.jpg
    New display
  • jishuyingyongxinnengyuandonglidianchi-227.jpg
    EV power
  • jin580326.png
    Sheet-metal working


Products relative to laser cutting

  • EV Battery
  • Electronics
  • Photovoltaic
  • Smart Home
  • Life Sciences
  • Modern Building
  • Transports
  • Sheet-metal Working



Customer service

Customer Service